mokomoko wappen - Bear

[Product Description]
This is a 2-way patch that can be
applied either by ironing or by adhesive.
It's perfect for practical use on clothes, bags, and also makes a cute addition to accessories like phone cases.

[How to Use]
Iron-On Application:
1. Place the patch in the desired position, cover with a cloth, and ensure the iron doesn't come into direct contact with the fabric.
2. Set the iron to dry medium heat
(150°C-160°C), and press firmly on the patch for 20-40 seconds, making sure to apply heat to all corners. For stronger adhesion, press from the reverse side.
*Note: When applying to heat-sensitive fabrics like acrylic-based materials, be cautious of the iron's temperature.
3. Do not move the patch until it has completely cooled. After 24 hours, it can be washed with water.
4. For long-term use or extra durability, it's recommended to sew the patch on.

Adhesive Application:
1. Clean the area where the patch will be applied to remove dirt and dust.
2. Peel the patch from its backing and press it, adhesive side down, onto the desired area.
*Note: Be careful when applying to paper or leather as the surface may peel off.

[Care Instructions]
⚪︎Wash by hand in water. Do not use chlorine bleach or dry clean.
⚪︎Avoid using a dryer.
⚪︎For frequent use or heavy wear, or to ensure stronger attachment, sew the patch on.
⚪︎For stretchy, fluffy, or materials that may not adhere well, it is recommended to sew the patch on.
⚪︎Be cautious when removing the patch after it has been applied as adhesive residue may remain.
⚪︎Avoid twisting the iron when pressing.
⚪︎Cannot be applied to waterproof or water-resistant fabrics, or damp/wet surfaces.

[Size]
Approx. 5.5cm (height) x 5.5cm (width)

[Composition]
Front: Rayon, Polyester
Back: Polyester, EVA resin